Paver Columns and Mailboxes in Orlando, FL

Entry columns and a matching mailbox pillar are small projects that do a lot of work. They frame a driveway, anchor a gate, and tie the front of the home together, especially when they match the pavers already on the ground.

This page covers what paver columns and mailbox pillars cost in Orlando, the HOA rules that often apply to them, and how we connect you with an installer who matches them to your existing hardscape.

Pavers Orlando Co is a referral service, not a contractor. We match you with a licensed, insured local installer and set up a free on-site estimate.

Paver Columns and Mailboxes in Orlando, FL

What Columns and Mailboxes Cost in Orlando

Pricing depends on the material and size. A brick column runs 500 to 1,800 dollars per pillar, a stone veneer column 1,500 to 3,500 dollars, and a brick mailbox 600 to 1,500 dollars. Entry columns are usually built as a matched pair on either side of a driveway, so budget for two.

FeatureTypical cost
Brick column (per pillar)$500 to $1,800
Stone veneer column (per pillar)$1,500 to $3,500
Brick mailbox pillar$600 to $1,500
Cap lighting (per pillar, added)$150 to $450

Decorative caps, stone or carved finishes, and lighting add to the base price. The foundation matters too, since a proper pair of columns needs footings, which can add to the cost but is what keeps them from leaning over time.

How Columns Are Actually Built

A column that lasts is not just stacked brick. It is built on a real foundation with a solid core. The build starts with a footing, a trenched and poured concrete base that anchors the column below grade so it stays plumb and does not shift in Florida’s sandy soil. On top of that sits a block or framed core, which is then faced with brick or stone veneer to match your home and pavers.

The column is finished with a cap that overhangs on all sides, both for looks and to shed water. A good mason dry-fits the cap before setting it to confirm the overhang is even.

Planning for lights, mailbox, and gates

The details have to be planned into the course layout. A light box, conduit, or mailbox insert should land on a full course of brick, not a cut one, which is why the layout is planned before the first brick goes down.

If a gate is part of the plan, the column spacing and footings have to account for the gate’s width and hardware, so that decision comes first.

Planning for lights, mailbox, and gates

Matching Your Existing Pavers

The reason to have your paver installer build the columns, rather than a separate mason, is matching. Columns and a mailbox that pick up the color and material of your driveway or walkway pavers read as one intentional design. Brands like Cambridge and others make coordinated column units and caps designed to tie into paver and wall systems, so the whole entry looks unified rather than assembled from separate projects.

When the columns clash with the pavers, the front of the home looks pieced together. When they match, they finish it.

HOA and Placement Rules

Entry columns and mailboxes are front-facing and often near the street, so two sets of rules commonly apply. Most Orlando-area HOAs require architectural review of anything visible from the street, including columns and mailbox pillars, under Florida Statute Chapter 720. The committee usually needs to approve the material, color, and design first, and many communities have a required mailbox style.

Placement matters too. A column or mailbox near the street may sit in or near the right-of-way, and there can be setback and sight-line rules so it does not block visibility at a driveway or intersection. A good installer checks both before building.

Common Uses Around the Home

Paver columns and pillars are versatile, and homeowners use them in more places than just the driveway entrance.

  • Driveway entrance columns, usually a matched pair, often with lanterns on top.
  • A mailbox pillar that matches the entry columns and the home.
  • Gate columns that anchor a driveway or garden gate and carry the hardware.
  • Fence-line and garden columns that define a yard or patio area.
  • Lighting or address pedestals built into the entry.
Common Uses Around the Home

Columns and Mailboxes Across Metro Orlando

Entry column work is most common where homes have the frontage for it. In Windermere, Dr. Phillips, and gated estate communities, matched stone columns with lighting and often a gate are the norm, and architectural review is part of the job. In established neighborhoods and newer master-planned areas, a matched brick mailbox and entry columns are a popular curb-appeal upgrade. We cover paver column and mailbox installation across Orange, Seminole, and Osceola counties.

How We Match You With an Installer

Pavers Orlando Co is not the contractor. We connect you with a licensed, insured local installer whose license we confirm against Orange County’s public database first. Columns are masonry work that should match your existing pavers, so we point you to installers who can tie the columns into your hardscape and handle the footings properly. You get an itemized estimate and deal with the installer directly from there.

Common Questions About Paver Columns in Orlando

A brick column runs 500 to 1,800 dollars per pillar, and a stone veneer column 1,500 to 3,500 dollars per pillar. Since entry columns are usually built as a matched pair, budget for two. Decorative caps, carved or stone finishes, and cap lighting at 150 to 450 dollars per pillar add to the base price, as do the footings, which are what keep the columns from leaning over time.

A brick mailbox pillar runs 600 to 1,500 dollars in the Orlando area, depending on size, material, and detailing. Adding lighting or matching it to a pair of entry columns raises the cost. Many HOAs have a required mailbox style, so check your community’s standard before building, since the pillar has to comply with the approved design.

Yes, and that is the main reason to have your paver installer build them. Columns and a mailbox that pick up the color and material of your driveway or walkway pavers read as one intentional design. Manufacturers make coordinated column units and caps designed to tie into paver and wall systems, so the whole entry looks unified rather than assembled from separate projects.

In most Orlando-area HOAs, yes. Anything visible from the street, including entry columns and mailbox pillars, typically needs architectural review under Florida Statute Chapter 720, and the committee usually approves the material, color, and design first. Many communities also require a specific mailbox style. A good installer confirms the HOA requirements before building.

Almost always a missing or inadequate footing. A column needs a poured concrete footing below grade to anchor it in Florida’s sandy soil. Without one, the column shifts as the ground moves and starts to lean or crack at the mortar joints. A proper build trenches and pours a real foundation before any brick or stone goes up, which is what keeps it plumb for decades.

Yes, but both should be planned before the columns are built. A light box and its conduit need to land on a full course of brick rather than a cut one, so the layout is planned around them. If a gate is part of the plan, the column spacing and footings have to account for the gate’s width and hardware. Deciding on lights and gates up front avoids cutting into finished columns later.

Get a Free Column or Mailbox Estimate in Orlando

Tell us what you want to build, whether entry columns, a mailbox pillar, or gate columns, the material, and your neighborhood. We will match you with a vetted local installer who can match your pavers and handle the HOA approval and come out to measure, at no cost and no obligation. Call (689) 686-8021 or request a quote online.